Professor Panos Tsakiropoulos

DEng Min Eng-Metallurgy MMet PhD

School of Chemical, Materials and Biological Engineering

Emeritus Professor of Metallurgy

Professor Panos Tsakiropoulos
Profile picture of Professor Panos Tsakiropoulos
p.tsakiropoulos@sheffield.ac.uk
+44 114 222 5960
Sir Robert Hadfield Building

Full contact details

Professor Panos Tsakiropoulos
School of Chemical, Materials and Biological Engineering
Sir Robert Hadfield Building
Mappin Street
Sheffield
S1 3JD
Profile

Panos Tsakiropoulos studied Mining Engineering and Metallurgy at the National Technical University of Athens, with postgraduate studies and research in the Department of Metallurgy of the University of Sheffield.

He joined the University of Surrey in 1986 as a New Blood Lecturer, was promoted to Reader in 1991 and was appointed to the Chair of Metallurgy of the University in 1996. He returned to Sheffield in 2006.

Research interests

Research interests are in the design and development of ferrous and non-ferrous alloys and composites for the energy, transport and aerospace industries and for biomedical applications via process-microstructure-property studies. Materials processing under equilibrium and non-equilibrium conditions is also researched as part of the alloy development. The emphasis of the research is on establishing (i) the effects of processing on the microstructure and properties of structural engineering materials and (ii) how processing can be tailored to particular engineering requirements for desirable microstructures and properties. Currently, alloys of Fe, Mo, Nb and Zr are under investigation.

  • Alloy Development: Intermetallics, Exotics, Nb Alloys, Mo Alloys
  • Study of the roles of heterogeneities, in-homogeneities and non-uniformities in materials processing and phase transformations
  • Study of Alloying Related Phenomena at the Electronic Level
  • Non-Equilibrium Processing of Alloys

Research group

  • Dr Claire Utton
  • Mr Amir Nanpazi
  • Mr Jack Nelson
  • Miss Eleftheria Karagianni
  • Miss Ofelia Hernandez-Negrete
  • Mr Andrew Tweddle
  • Mr Gary Bywater
  • Miss Zheng Xu
  • Mr Boniface Anazodo
  • Mr Conor McCaughey
  • Mr Ioannis Papadimitriou
  • Mrs Monica Balboa Garcia
  • Mr Jiang Zhao
  • Mr Mohammad Hossein Ghadyani
  • Mr Edward Gallagher Project student
  • Mr Arthur Resende Visiting academic staff
  • Professor Armando Cirilo De Souza

Research centres

Key projects:

  • Study of Alloying Behaviour in Intermetallics and Advanced Alloys
  • Process-Microstructure-Property Studies in Nb Alloys
  • Development of Mo Alloys
  • Development of Oxidation Resistant High-Temperature Alloys
  • Study of the roles of segregations and inclusions in thermomechanical processing and mechanical properties
  • Development of materials for gas turbine technologies for hydrogen-rich syngas combustion
Publications

Journal articles

  • Graham SJ, Gallagher E, Baxter GJ, Azakli Y, Weeks J, Gelmetti M, D'Souza N, Boettcher C, Roebuck B, Tsakiropoulos P & Utton C (2024) . Journal of Materials Research and Technology, 28, 3217-3224.
  • Souza AC, Aristone F, Santana AN, Miyai A, Cione FC, Tsakiropoulos P & Rossi JL (2022) . Journal of Materials Research and Technology.
  • Vellios N & Tsakiropoulos P (2022) . Materials, 15(17).
  • Senkov ON, Tsakiropoulos PP & Couzinié J-P (2022) . Metals, 12(2).
  • Tsakiropoulos P (2022) . Progress in Materials Science, 123, 100714-100714.
  • Thandorn T & Tsakiropoulos P (2021) . Materials, 14(24).
  • Vellios N, Keating P & Tsakiropoulos P (2021) . Metals, 11(11).
  • Thandorn T & Tsakiropoulos P (2021) . Materials, 14(20).
  • Tsakiropoulos P (2021) . Materials, 14(4).
  • Souza AC, Rossi JL, Tsakiropoulos P & Aristone F (2021) . Metals and Materials International, 27(11), 4820-4830.
  • Zhao J, Utton C & Tsakiropoulos P (2020) . Materials, 13(7).
  • Xu Z, Utton C & Tsakiropoulos P (2020) . Materials, 13(1).
  • Papadimitriou I, Utton C & Tsakiropoulos P (2019) . Materials, 12(19).
  • Papadimitriou I, Utton C & Tsakiropoulos P (2019) . Materials, 12(17).
  • Hernández-Negrete O & Tsakiropoulos P (2019) . Materials, 12(7).
  • Souza AC, Aristone F, Rossi JL, Martinez LG, Cione FC, Tsakiropoulos P, Grandini CR & da Silva WF (2019) . International Journal of Refractory Metals and Hard Materials, 80, 216-224.
  • Ghadyani M, Utton C & Tsakiropoulos P (2019) . Materials, 12(5).
  • Ghadyani M, Utton C & Tsakiropoulos P (2019) . Materials, 12(2).
  • Zacharis E, Utton C & Tsakiropoulos P (2018) . Materials, 11(12).
  • Xu Z, Utton C & Tsakiropoulos P (2018) . Materials, 11(10).
  • Nelson J, Ghadyani M, Utton C & Tsakiropoulos P (2018) . Materials, 11(9).
  • Hernandez-Negrete O & Tsakiropoulos P (2018) . Microscopy and Microanalysis, 24(S1), 2258-2259.
  • Tsakiropoulos P (2018) . Journal of Alloys and Compounds, 748, 569-576.
  • Tsakiropoulos P (2018) . Materials, 11(5).
  • Utton CA, Papadimitriou I, Kinoshita H & Tsakiropoulos P (2017) . Journal of Alloys and Compounds, 717, 303-316.
  • Papadimitriou I, Utton C & Tsakiropoulos P (2017) . Science and Technology of Advanced Materials, 18(1), 467-479.
  • Tsakiropoulos P (2017) . Journal of Alloys and Compounds, 708, 961-971.
  • Faraji M, Wilcox DP, Thackray R, Howe AA, Todd I & Tsakiropoulos P (2015) . Metallurgical and Materials Transactions B, 46(6), 2490-2502.
  • Papadimitriou I, Utton C & Tsakiropoulos P (2015) . Metallurgical and Materials Transactions A, 46(12), 5526-5536.
  • Papadimitriou I, Utton C & Tsakiropoulos P (2015) . Computational Materials Science, 107, 116-121.
  • Moris DN, Bakoyiannis C, Dousi E, Tsakiropoulos P, Tsakiropoulos N, Tsigris C, Perrea D & Georgopoulos S (2015) Novel protocol for creation and study of abdominal aortic aneurysm with porcine pancreatic elastase infusion in rats. Archives of Hellenic Medicine, 32(5), 636-644.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ (2015) . International Journal of Minerals, Metallurgy, and Materials, 22(3), 272-284.
  • Papadimitriou I, Utton C & Tsakiropoulos P (2015) . Acta Materialia, 86, 23-33.
  • Sofocleous K, Ogin SL, Tsakiropoulos P, Draconakis V & Doumanidis C (2014) . Journal of Composite Materials, 48(30), 3799-3813.
  • Papadimitriou I, Utton C, Scott A & Tsakiropoulos P (2014) . Intermetallics, 54, 125-132.
  • Faraji M, Wilcox DP, Thackray RP, Todd I, Howe AA & Tsakiropoulos P (2014) . Materials Science and Technology (United Kingdom), 30(10), 1177-1188.
  • Papadimitriou I, Utton C, Scott A & Tsakiropoulos P (2014) . Metallurgical and Materials Transactions A.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ (2014) . Transactions of the Indian Institute of Metals.
  • Tsakiropoulos P (2014) . Intermetallics, 55, 95-101.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ (2014) . ISIJ International, 54(7), 1667-1676.
  • Li Z & Tsakiropoulos P (2013) . Journal of Alloys and Compounds, 550, 553-560.
  • Li Z & Tsakiropoulos P (2012) . Intermetallics, 26, 18-25.
  • Tsakiropoulos P, Zelenitsas K & Vellios N (2011) . Materials Research Society Symposium Proceedings, 1295, 367-372.
  • Grammenos I & Tsakiropoulos P (2011) . Intermetallics, 19(10), 1612-1621.
  • Li Z & Tsakiropoulos P (2011) . Materials Research Society Symposium Proceedings, 1295, 379-384.
  • Grammenos I & Tsakiropoulos P (2011) Study of the role of Hf, Mo and W additions in the microstructure of Nb-20Si silicide based alloys. Intermetallics.
  • Li Z & Tsakiropoulos P (2011) Study of the effect of Ti and Ge in the microstructure of Nb-24Ti-18Si-5Ge in situ composite. Intermetallics.
  • Antipas GSE, Lekakou C & Tsakiropoulos P (2011) . Materials Characterization, 62(4), 402-408.
  • Vellios N & Tsakiropoulos P (2010) . INTERMETALLICS, 18(9), 1729-1736.
  • Grammenos I & Tsakiropoulos P (2010) . INTERMETALLICS, 18(8), 1524-1530.
  • Li ZF & Tsakiropoulos P (2010) . INTERMETALLICS, 18(5), 1072-1078.
  • Thandorn T & Tsakiropoulos P (2010) . INTERMETALLICS, 18(5), 1033-1038.
  • Grammenos I & Tsakiropoulos P (2010) . INTERMETALLICS, 18(2), 242-253.
  • Faraji M, Thackray R, Todd I & Tsakiropoulos P (2010) Classification and rating of inclusions in a high carbon steel. TMS Annual Meeting, 25-36.
  • Faraji M, Thackray R, Todd I & Tsakiropoulos P (2010) Rating inclusions in an as-cast carbon steel. AISTech - Iron and Steel Technology Conference Proceedings, 841-848.
  • Huang H, Shao G & Tsakiropoulos P (2008) . J ALLOY COMPD, 459(1-2), 185-190.
  • Moslemzadeh N, Beamson G, Diplas S, Tsakiropoulos P & Watts JF (2008) . SURF SCI, 602(1), 216-225.
  • Vellios N & Tsakiropoulos P (2007) . INTERMETALLICS, 15(12), 1529-1537.
  • Vellios N & Tsakiropoulos P (2007) . INTERMETALLICS, 15(12), 1518-1528.
  • Geng J & Tsakiropoulos P (2007) . INTERMETALLICS, 15(3), 382-395.
  • Geng J, Tsakiropoulos P & Shao GS (2007) . INTERMETALLICS, 15(3), 270-281.
  • Geng J, Tsakiropoulos P & Shao GS (2007) . INTERMETALLICS, 15(1), 69-76.
  • Geng J, Tsakiropoulos P & Shao GS (2006) . MAT SCI ENG A-STRUCT, 441(1-2), 26-38.
  • Kambakas K & Tsakiropoulos P (2006) . MAT SCI ENG A-STRUCT, 435, 187-192.
  • Moslemzadeh N, Beamson G, Tsakiropoulos P, Watts JF, Haines SR & Weightman P (2006) . J ELECTRON SPECTROSC, 152(3), 148-151.
  • Moslemzadeh N, Beamson G, Tsakiropoulos P, Watts JF, Haines SR & Weightman P (2006) . J ELECTRON SPECTROSC, 152(3), 129-133.
  • Geng J, Shao G & Tsakiropoulos P (2006) . INTERMETALLICS, 14(7), 832-837.
  • Zelenitsas K & Tsakiropoulos P (2006) . INTERMETALLICS, 14(6), 639-659.
  • Zelenitsas K & Tsakiropoulos P (2006) . INTERMETALLICS, 14(5), 584-584.
  • Geng J, Tsakiropoulos P & Shao G (2006) . INTERMETALLICS, 14(3), 227-235.
  • Zelenitsas K & Tsakiropoulos P (2006) . MAT SCI ENG A-STRUCT, 416(1-2), 269-280.
  • Moslemzadeh N, Beamson G, Tsakiropoulos P & Watts JF (2006) . SURF SCI, 600(2), 265-272.
  • Drawin S, Heilmaier M, Jéhanno P, Wu X, Belaygue P, Tsakiropoulos P, Vilasi M, Guédou JY, Novak P, Delabrouille F , Jones N et al (2006) The EU-funded "ULTMAT" project: Ultra high temperature materials for turbines. ICAS-Secretariat - 25th Congress of the International Council of the Aeronautical Sciences 2006, 3, 1943-1952.
  • Price AJ, Tsakiropoulos P, Wenman MR & Chard-Tuckey PR (2006) . American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 2006.
  • Li HP & Tsakiropoulos P (2006) Droplet dynamic and solidification progress during rotating disk centrifugal atomization. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 16(5), 793-799.
  • Zelenitsas K & Tsakiropoulos P (2005) . INTERMETALLICS, 13(10), 1079-1095.
  • Mitchell T, Diplas S & Tsakiropoulos P (2005) . PHILOS MAG, 85(24), 2733-2756.
  • Mitchell T, Diplas S & Tsakiropoulos P (2005) . J ALLOY COMPD, 392(1-2), 127-141.
  • Pankhurst DA, Yuan Z, Nguyen-Manh D, Abel ML, Shao G, Watts JF, Pettifor DG & Tsakiropoulos P (2005) . PHYS REV B, 71(7).
  • Beamson G, Haines SR, Moslemzadeh N, Tsakiropoulos P, Watts JF, Weightman P & Williams K (2005) . J ELECTRON SPECTROSC, 142(2), 151-162.
  • Beamson G, Haines SR, Moslemzadeh N, Tsakiropoulos P, Weightman P & Watts JF (2004) . SURF INTERFACE ANAL, 36(3), 275-279.
  • Xin L, Shao G, Wang F, Tsakiropoulos P & Li T (2003) . INTERMETALLICS, 11(7), 651-660.
  • Abel ML, Tsakiropoulos P, Watts JF & Matthew JAD (2002) . SURF INTERFACE ANAL, 33(10-11), 775-780.
  • Diplas S, Tsakiropoulos P, Shao G, Watts JF & Matthew JAD (2002) A study of alloying behaviour in the Ti-Al-V system. ACTA MATER, 50(8), 1951-1960.
  • Mitchell T, Diplas S, Tsakiropoulos P, Watts JF & Matthew JAD (2002) . PHILOS MAG A, 82(4), 841-855.
  • Johannesson B, Ogin SL, Surappa MK, Tsakiropoulos P, Brynjolfsson S & Thorbjornsson IO (2001) Effect of reinforcement geometry on matrix stresses in three aluminium metal matrix composite systems. SCRIPTA MATER, 45(8), 993-1000.
  • Diplas S, Watts JF, Tsakiropoulos P, Shao G, Beamson G & Matthew JAD (2001) X-ray photoelectron spectroscopy studies of Ti-Al and Ti-Al-V alloys using CrK beta radiation. SURF INTERFACE ANAL, 31(8), 734-744.
  • Arvanitis A, Diplas S, Tsakiropoulos P, Watts JF, Whiting MJ, Morton SA & Matthew JAD (2001) An experimental study of bonding and crystal structure modifications in MoSi2 and MoSi2+xAl (x=10 to 40 at% Al) via Auger parameter shifts and charge transfer calculations. ACTA MATER, 49(6), 1063-1078.
  • Liu YQ, Shao G & Tsakiropoulos P (2001) On the oxidation behaviour of MoSi2. INTERMETALLICS, 9(2), 125-136.
  • Diplas S, Watts JF, Morton SA, Beamson G, Tsakiropoulos P, Clark DT & Castle JE (2001) Electron spectroscopy with CrK beta photons: high energy XPS and X-AES. J ELECTRON SPECTROSC, 113(2-3), 153-166.
  • Shao G, Nguyen-Manh D, Pettifor DG & Tsakiropoulos P (2000) omega-Phase formation in a rapidly solidified Cr-40 at.% Al alloy. PHIL MAG LETT, 80(11), 703-710.
  • Shao G & Tsakiropoulos P (2000) On the omega phase formation in Cr-Al and Ti-Al-Cr alloys. ACTA MATER, 48(14), 3671-3685.
  • Liu Y, Shao G & Tsakiropoulos P (2000) Thermodynamic reassessment of the Mo-Si and Al-Mo-Si systems. INTERMETALLICS, 8(8), 953-962.
  • Tsakiropoulos GSP (2000) . Philosophical Magazine A, 80(3), 693-710.
  • Shao G & Tsakiropoulos P (2000) On the structural evolution of Fe-Al laminates obtained by physical vapour deposition. PHILOS MAG A, 80(3), 693-710.
  • Diplas S, Shao G, Tsakiropoulos P, Watts JF & Matthew JAD (2000) Calculations of charge transfer in Mg- and Al-transition metal alloys using the Auger parameter. SURF INTERFACE ANAL, 29(1), 65-72.
  • Diplas S, Tsakiropoulos P & Brydson RMD (1999) Development of physical vapour deposited Mg-Zr alloys - Part 3 - Comparison of alloying and corrosion behaviour in Mg-V and Mg-Zr physical vapour deposited alloys. MATER SCI TECH SER, 15(12), 1373-1378.
  • Diplas S, Tsakiropoulos P & Brydson RMD (1999) Development of physical vapour deposited Mg-Zr alloys - Part 1 - Characterisation of as deposited alloys. MATER SCI TECH-LOND, 15(12), 1349-1357.
  • Diplas S, Tsakiropoulos P, Brydson RMD & Watts JF (1999) Development of physical vapour deposited Mg-Zr alloys - Part 2 - Characterisation of corrosion products. MATER SCI TECH-LOND, 15(12), 1359-1372.
  • Shao G & Tsakiropoulos P (1999) Lattice parameters of TM(3d)-Al solid solutions. MAT SCI ENG A-STRUCT, 271(1-2), 286-290.
  • Diplas S, Shao G, Morton SA, Tsakiropoulos P & Watts JF (1999) Calculations of charge transfer in Nb-17Al and V-50Al alloys, using the Auger parameter. INTERMETALLICS, 7(8), 937-946.
  • Grosdidier T, Keramidas P, Shao G & Tsakiropoulos P (1999) Influence of 2.8% zirconium addition on the microstructure of rapidly solidified A1-8Fe-4Ni alloy. MAT SCI ENG A-STRUCT, 267(1), 60-70.
  • Grosdidier T, Keramidas P, Fundenberger JJ, Wagner F & Tsakiropoulos P (1999) Influence of atomised powder characteristics on texture and microstructure development in extruded A1-8Fe-4Ni base alloys. MAT SCI ENG A-STRUCT, 267(1), 71-81.
  • Shao G & Tsakiropoulos P (1999) Solidification structures of Ti-Al-Cr alloys. INTERMETALLICS, 7(5), 579-587.
  • Diplas S, Tsakiropoulos P & Brydson RMD (1998) Development of Mg-V alloys by physical vapour deposition Part 1 - Bulk and surface characterisation. MATER SCI TECH SER, 14(7), 689-698.
  • Diplas S, Tsakiropoulos P, Brydson RMD & Watts JF (1998) A study of charge transfer in vapour deposited Mg-V crystalline alloys via changes in Auger parameters. PHILOS MAG A, 77(4), 1067-1079.
  • Coast-Smith L, Brydson R, Tsakiropoulos P, Hofer F, Grogger W, Dunford DV & Ward-Close CM (1998) Characterisation of thick film Ti/Al nanolaminates. MICRON, 29(1), 17-31.
  • Diplas S, Tsakiropoulos P, Brydson RMD & Watts JF (1998) . Materials Science and Technology, 14(7), 699-711.
  • Li HP & Tsakiropoulos P (1998) Calculation of powder particle size in rotating disc centrifugal atomization using wave theory. INT J NON-EQUILIB PR, 11(1), 55-70.
  • Dodd SB, Morris S, Gardiner RW, Brydson RMD, Diplas S & Tsakiropoulos P (1998) Preliminary corrosion evaluation of some novel bulk electron beam evaporated magnesium alloys.. CORROS REV, 16(1-2), 159-174.
  • Stone IC & Tsakiropoulos P (1998) The effect of reinforcement on the notched and unnotched room temperature tensile properties of Al-4wt%Cu/SiCp MMCs. MAT SCI ENG A-STRUCT, 241(1-2), 19-29.
  • Shao G, Tsakiropoulos P & Miodownik AP (1997) Role of nucleation in phase competition in binary Ti-Al alloys. MATER SCI TECH SER, 13(10), 797-805.
  • Shao G, Tsakiropoulos P & Miodownik AP (1997) . Materials Science and Technology, 13(10), 797-805.
  • Shao G, Tsakiropoulos P, Manh DG & Pettifor DG (1997) Omega phase formation in a physically vapour-deposited Fe-Al alloy. PHIL MAG LETT, 76(3), 207-216.
  • Stone IC, Wilson CE & Tsakiropoulos P (1997) The dependence of ageing on 3-dimensional spatial distribution of reinforcement in Al-4wt%Cu/SiCp MMCS. SCRIPTA MATER, 37(3), 305-310.
  • Whiting MJ & Tsakiropoulos P (1997) Morphological evolution of lamellar structures: The Cu-Al eutectoid. ACTA MATER, 45(5), 2027-2042.
  • Shao G & Tsakiropoulos P (1997) Ultra-thin twin plates and growth domains in the gamma phase as a product of the B2 phase decomposition in Ti-40at%Al-10at%V. PHILOS MAG A, 75(3), 657-676.
  • Passa E, Shao G & Tsakiropoulos P (1997) Beta phase decomposition in Nb-17 at% Al alloy. PHILOS MAG A, 75(3), 637-655.
  • Ward-Close CM, Goodwin PS, Hoo N, Tsakiropoulos P, Srisukhumbowornchai N, Senkov ON, Froes FH & Ovecoglu ML (1997) Microstructural control in gamma titanium aluminide intermetallic powder compacts. Proceedings of the Advanced Particulate Materials & Processes, 139-144.
  • Passa E, Shao G & Tsakiropoulos P (1997) Phase transformations in Nb-17Al-xMo alloys. INTERMETALLICS, 5(3), 203-219.
  • Stergiou A & Tsakiropoulos P (1997) The intermediate and high-temperature oxidation behaviour of (Mo,X)Si-2 (X=W,Ta) intermetallic alloys. INTERMETALLICS, 5(2), 117-126.
  • Stergiou A, Tsakiropoulos P & Brown A (1997) The intermediate and high temperature oxidation behaviour of Mo(Si1-xAlx)(2) intermetallic alloys. INTERMETALLICS, 5(1), 69-81.
  • Shao G, Tsakiropoulos P & Miodownik AP (1996) Ordering and decomposition of the beta phase in melt-spun TiAl1-xVx alloys. MAT SCI ENG A-STRUCT, 216(1-2), 1-10.
  • Chrysanthou A, Jenkins RC, Whiting MJ & Tsakiropoulos P (1996) A study of the combustion synthesis of MoSi2 and MoSi2-matrix composites. J MATER SCI, 31(16), 4221-4226.
  • Hoo N, Goodwin PS, Brydson RM, Tsakiropoulos P, WardClose CM & Froes FH (1996) Microstructural control in a gamma-TiAl alloy by MA and HIPing. JOM-J MIN MET MAT S, 48(7), 40-41.
  • Brydson R, Hofer F, Upadhyaya D, Kothleitner G, WardClose M, Tsakiropoulos P & Froes S (1996) On the application of energy filtering TEM in materials science .2. Study of a fibre-reinforced metal matrix composite. MICRON, 27(2), 107-120.
  • Chrysanthou A, Davies NW, Li J, Tsakiropoulos P & Chinyamakobvu OS (1996) Reaction synthesis of carbide-reinforced cast iron. J MATER SCI LETT, 15(6), 473-474.
  • Davis SJ, Watts JF & Tsakiropoulos P (1996) Degassing of gas atomised Al-Li base alloy powders .2. Surface analysis studies. INT J RAPID SOLIDIF, 9(3), 211-240.
  • Davis SJ, Tsakiropoulos P & Watts JF (1996) Degassing of gas atomised Al-Li base alloy powders .1. Mass spectrometry studies. INT J RAPID SOLIDIF, 9(3), 187-209.
  • Upadhyaya D, Sandhu S, Tsakiropoulos P, WardClose CM & Froes FH (1995) Interfacial reactions in Ti-6Al-4V/sigma(SM 1240) fibre metal matrix composite. MATER SCI TECH SER, 11(11), 1156-1159.
  • Upadhyaya D & Tsakiropoulos P (1995) Evaluation of the effect of sizing levels on transverse flexural and shear strengths of carbon epoxy composites. J MATER PROCESS TECH, 54(1-4), 17-20.
  • Whiting MJ & Tsakiropoulos P (1995) Ledge mechanism of pearlite growth: Growth velocity of ferrous pearlite. MATER SCI TECH SER, 11(10), 977-984.
  • Whiting MJ & Tsakiropoulos P (1995) . Materials Science and Technology, 11(10), 977-984.
  • WHITING MJ & TSAKIROPOULOS P (1995) APPRAISAL OF RECENT WORK ON ROLE OF CRYSTALLOGRAPHY IN FERROUS AND NONFERROUS PEARLITE. MATER SCI TECH SER, 11(8), 717-727.
  • SHAO G, TSAKIROPOULOS P & MIODOWNIK AP (1995) THE LAMELLAR GAMMA+BETA STRUCTURE IN AL-30TI-20V ALLOY. SCRIPTA METALL MATER, 33(1), 13-17.
  • WHITING MJ & TSAKIROPOULOS P (1995) THE LEDGE MECHANISM OF PEARLITE GROWTH. SCRIPTA METALL MATER, 32(12), 1965-1966.
  • SHAO G, MIODOWNIK AP & TSAKIROPOULOS P (1995) OMEGA-PHASE FORMATION IN V-AL AND TI-AL-V ALLOYS. PHILOS MAG A, 71(6), 1389-1408.
  • Stone IC & Tsakiropoulos P (1995) . Materials Science and Technology, 11(3), 222-227.
  • Stone IC & Tsakiropoulos P (1995) . Materials Science and Technology, 11(3), 213-221.
  • STONE IC & TSAKIROPOULOS P (1995) CHARACTERIZATION OF SPATIAL-DISTRIBUTION OF REINFORCEMENT IN POWDER-METALLURGY ROUTE AL/SICP METAL-MATRIX COMPOSITES .1. TECHNIQUES BASED ON MICROSTRUCTURE. MATER SCI TECH SER, 11(3), 213-221.
  • STONE IC & TSAKIROPOULOS P (1995) CHARACTERIZATION OF SPATIAL-DISTRIBUTION OF REINFORCEMENT IN POWDER-METALLURGY ROUTE AL/SICP METAL-MATRIX COMPOSITES .2. TECHNIQUES BASED ON LOCAL ENERGY-DISPERSIVE X-RAY-ANALYSIS. MATER SCI TECH SER, 11(3), 222-227.
  • SHAO G, TSAKIROPOULOS P & MIODOWNIK AP (1995) PHASE COMPETITION AND SELECTION IN AL-30TI-20V ALLOY. INT J RAPID SOLIDIF, 9(1), 13-32.
  • SHAO G, TSAKIROPOULOS P & MIODOWNIK AP (1995) PHASE-TRANSFORMATIONS IN TI-40AL-10V. INTERMETALLICS, 3(4), 315-325.
  • STONE IC & TSAKIROPOULOS P (1994) THE EFFECT OF THE SPATIAL-DISTRIBUTION OF REINFORCEMENT ON THE FABRICATION AND HEAT-TREATMENT OF (AL-4WT-PERCENT-CU)-SIC PARTICLE METAL-MATRIX COMPOSITES. MAT SCI ENG A-STRUCT, 189(1-2), 285-290.
  • UPADHYAYA D, WOOD M, WARDCLOSE CM, TSAKIROPOULOS P & FROES FH (1994) COATING AND FIBER EFFECTS ON SIC-REINFORCED TITANIUM. JOM-J MIN MET MAT S, 46(11), 62-67.
  • UPADHYAYA D, TSAKIROPOULOS P, WARDCLOSE CM & FROES FH (1994) EFFECT OF FIBER SURFACE-MORPHOLOGY ON STABILITY OF C/TIBX COATINGS IN TI-6AL-4V/SIGMA (SM1240) FIBER METAL-MATRIX COMPOSITE. MATER SCI TECH SER, 10(10), 887-893.
  • UPADHYAYA D, BRYDSON R, WARDCLOSE CM, TSAKIROPOULOS P & FROES FH (1994) AS RECEIVED TI-6AI-4V/SIGMA/SIC FIBER-COMPOSITE. MATER SCI TECH SER, 10(9), 797-806.
  • SHAO G & TSAKIROPOULOS P (1994) PREDICTION OF PHASE SELECTION IN RAPID SOLIDIFICATION USING TIME-DEPENDENT NUCLEATION THEORY. ACTA METALL MATER, 42(9), 2937-2942.
  • FAN Z & TSAKIROPOULOS P (1994) ON THE MEAN INTERNAL-STRESSES IN 2-DUCTILE-PHASE ALLOYS. MAT SCI ENG A-STRUCT, 184(1), 57-64.
  • WHITING MJ & TSAKIROPOULOS P (1994) THE LEDGE MECHANISM OF PEARLITE GROWTH - SOME THOUGHTS ON THE SOLUTION TO THE KINETIC PROBLEM. SCRIPTA METALL MATER, 30(8), 1031-1036.
  • SHAO G, GROSDIDIER T & TSAKIROPOULOS P (1994) THE METASTABLE DISORDERED GAMMA (TIAL) PHASE AND ITS ORDERING PROCESS IN A RAPIDLY SOLIDIFIED EQUIATOMIC TIAL ALLOY WITH VANADIUM ADDITION. SCRIPTA METALL MATER, 30(7), 809-814.
  • Stergiou A & Tsakiropoulos P (1994) . MRS Proceedings, 364.
  • Baliga CB, Tsakiropoulos P, Rawson M & Miodownik AP (1994) Microstructure property relationships in PM Fe-Cr-B alloys. Proceedings of the Symposium on High Performance Metal and Ceramic Matrix Composites, 99-111.
  • FAN Z, TSAKIROPOULOS P & MIODOWNIK AP (1994) A GENERALIZED LAW OF MIXTURES. J MATER SCI, 29(1), 141-150.
  • FAN Z, MIODOWNIK AP & TSAKIROPOULOS P (1993) MICROSTRUCTURAL CHARACTERIZATION OF 2-PHASE MATERIALS. MATER SCI TECH SER, 9(12), 1094-1100.
  • Fan Z, Miodownik AP & Tsakiropoulos P (1993) . Materials Science and Technology, 9(12), 1094-1100.
  • FAN Z, TSAKIROPOULOS P & MIODOWNIK AP (1993) YIELD STRENGTH OF 2 DUCTILE-PHASE ALLOYS. MATER SCI TECH SER, 9(10), 863-868.
  • Fan Z, Tsakiropoulos P & Miodownik AP (1993) . Materials Science and Technology, 9(10), 863-868.
  • WHITING MJ & TSAKIROPOULOS P (1993) ON THE LEDGE MECHANISM OF PEARLITE GROWTH - THE CU-AL LAMELLAR EUTECTOID. SCRIPTA METALL MATER, 29(3), 401-406.
  • BALIGA CB & TSAKIROPOULOS P (1993) DEVELOPMENT OF CORROSION-RESISTANT MAGNESIUM ALLOYS .1. CHARACTERIZATION OF SPLAT QUENCHED MG-10AL AND MG-16AL ALLOYS. MATER SCI TECH SER, 9(6), 507-511.
  • BALIGA CB & TSAKIROPOULOS P (1993) DEVELOPMENT OF CORROSION-RESISTANT MAGNESIUM ALLOYS .2. STRUCTURE OF CORROSION PRODUCTS ON RAPIDLY SOLIDIFIED MG-16AL ALLOYS. MATER SCI TECH SER, 9(6), 513-519.
  • BAKER MA & TSAKIROPOULOS P (1993) THE APPLICATION OF CHEMICAL-STATE AES AND SAM TO THE EXAMINATION OF SPRAY-FORMED ALUMINUM-ALLOY FRACTURE SURFACES. SURF INTERFACE ANAL, 20(7), 589-594.
  • NORMAN AF & TSAKIROPOULOS P (1993) STRENGTHENING MECHANISMS IN POWDER-METALLURGY AL-LI-HF ALLOYS. MATER SCI TECH SER, 9(3), 228-234.
  • Norman AF & Tsakiropoulos P (1993) . Materials Science and Technology, 9(3), 228-234.
  • FAN Z, TSAKIROPOULOS P, SMITH PA & MIODOWNIK AP (1993) EXTENSION OF THE HALL-PETCH RELATION TO 2-DUCTILE-PHASE ALLOYS. PHILOS MAG A, 67(2), 515-531.
  • SHAO G, TSAKIROPOULOS P & MIODOWNIK AP (1993) THE MICROSTRUCTURE OF RAPIDLY SOLIDIFIED AL-8FE-4NI-1MO ALLOY POWDERS. INT J RAPID SOLIDIF, 8(1), 41-64.
  • FAN ZY, TSAKIROPOULOS P & MIODOWNIK AP (1992) PREDICTION OF YOUNG MODULUS OF PARTICULATE 2 PHASE COMPOSITES. MATER SCI TECH SER, 8(10), 922-929.
  • Fan Z, Tsakiropoulos P & Miodownik AP (1992) . Materials Science and Technology, 8(10), 922-929.
  • Stone IC & Tsakiropoulos P (1992) Cooling rates in gas atomised Al-4wt%Cu alloy powders. International journal of rapid solidification, 7(3), 177-190.
  • STONE IC & TSAKIROPOULOS P (1992) COOLING RATES IN GAS ATOMIZED AL-4WT-PERCENT-CU ALLOY POWDERS. INT J RAPID SOLIDIF, 7(3), 177-190.
  • NORMAN AF & TSAKIROPOULOS P (1992) RAPID SOLIDIFICATION OF AL-HF ALLOYS - ANALYSIS OF STRENGTH OF EXTRUDED HIGH-PRESSURE GAS ATOMIZED POWDERS. INT J RAPID SOLIDIF, 7(2), 109-126.
  • ADKINS NJE & TSAKIROPOULOS P (1991) DESIGN OF POWDER-METALLURGY ALUMINUM-ALLOYS FOR APPLICATIONS AT ELEVATED-TEMPERATURES .2. TENSILE PROPERTIES OF EXTRUDED AND CONFORMED GAS ATOMIZED POWDERS. MATER SCI TECH SER, 7(5), 419-426.
  • ADKINS NJE & TSAKIROPOULOS P (1991) DESIGN OF POWDER-METALLURGY ALUMINUM-ALLOYS FOR APPLICATIONS AT ELEVATED-TEMPERATURES .1. MICROSTRUCTURE OF HIGH-PRESSURE GAS ATOMIZED POWDERS. MATER SCI TECH SER, 7(4), 334-340.
  • BALIGA CB, TSAKIROPOULOS P & JEYNES C (1991) SURFACE CONTAMINATION AND ITS EFFECT ON THE CORROSION OF RAPIDLY SOLIDIFIED MG-AL ALLOY SPLATS. J MATER SCI, 26(6), 1497-1504.
  • Baliga CB & Tsakiropoulos P (1991) On the development of corrosion resistant Mg-Al alloys. Light-Weight Alloys for Aerospace Applications II, 439-451.
  • Tsakiropoulos P & Adkins NJE (1991) Design of powder metallurgy aluminium alloys. Light-Weight Alloys for Aerospace Applications II, 297-310.
  • NORMAN AF & TSAKIROPOULOS P (1991) RAPID SOLIDIFICATION OF AL-HF ALLOYS - SOLIDIFICATION MICROSTRUCTURES AND DECOMPOSITION OF SOLID-SOLUTIONS. INT J RAPID SOLIDIF, 6(3-4), 185-213.
  • ADKINS NJE & TSAKIROPOULOS P (1991) SOLIDIFICATION OF HIGH-PRESSURE GAS ATOMIZED AL-CR ALLOY POWDERS .1. DEPENDENCE OF NUCLEATION TEMPERATURE ON NUCLEANT POTENCY. INT J RAPID SOLIDIF, 6(2), 87-100.
  • ADKINS NJE & TSAKIROPOULOS P (1991) SOLIDIFICATION OF HIGH-PRESSURE GAS ATOMIZED AL-CR ALLOY POWDER PARTICLES .2. DISTRIBUTION OF INTERMETALLICS IN THE POWDER PARTICLES. INT J RAPID SOLIDIF, 6(2), 101-114.
  • ADKINS NJE, NORMAN AF & TSAKIROPOULOS P (1991) SPECIMEN PREPARATION FOR TEM STUDIES OF RAPIDLY SOLIDIFIED POWDERS. INT J RAPID SOLIDIF, 6(1), 77-86.
  • CARNEY TJ, TSAKIROPOULOS P, WATTS JF & CASTLE JE (1990) OXIDATION AND SURFACE SEGREGATION IN RAPIDLY SOLIDIFIED AL-ALLOY POWDERS. INT J RAPID SOLIDIF, 5(2-3), 189-217.
  • JUAREZISLAS JA, TSAKIROPOULOS P & JONES H (1990) THE RESPONSE OF AL-CR-HF ALLOYS TO EXTENDED SOAKING TREATMENT AT 0.7 TM. INT J RAPID SOLIDIF, 5(2-3), 177-188.
  • PAN LM, SAUNDERS N & TSAKIROPOULOS P (1989) PREFERENTIAL NUCLEATION IN UNDERCOOLED LIQUID ALUMINUM ALLOYS-II. MATER SCI TECH SER, 5(6), 609-612.
  • Pan L-M, Saunders N & Tsakiropoulos P (1989) . Materials Science and Technology, 5(6), 609-612.
  • Carney TJ, Castle JE, Tsakiropoulos P, Waldron MB & Watts JF (1989) Surface studies of rapidly solidified aluminium alloy powder. Key Engineering Materials, 29-31, 291-302.
  • Adkins NJE, Goodwin PS, Tsakiropoulos P & Waldron MB (1989) Powder metallurgy research at the University of Surrey. Key Engineering Materials, 29-31, 783-792.
  • BALIGA CB, TSAKIROPOULOS P & WATTS JF (1989) CORROSION PRODUCTS FORMED ON A RAPIDLY SOLIDIFIED MG-AL ALLOY. INT J RAPID SOLIDIF, 4(4), 231-250.
  • ADKINS NJE, GOODWIN PS & TSAKIROPOULOS P (1988) A TECHNIQUE FOR EVALUATING ALUMINUM-ALLOYS FOR HIGH-PRESSURE GAS ATOMIZATION. MATER SCI ENG, 98, 115-117.
  • TSAKIROPOULOS P, PRATT RC, JONES H, RESTALL JE & GARDINER RW (1988) DEVELOPMENT OF AL-CR-X AND AL-CR-ZR-X ALLOYS BY RAPID SOLIDIFICATION FROM THE MELT. MATER SCI ENG, 98, 143-147.
  • ADKINS NJE, SAUNDERS N & TSAKIROPOULOS P (1988) RAPID SOLIDIFICATION OF PERITECTIC ALUMINUM-ALLOYS. MATER SCI ENG, 98, 217-219.
  • SAUNDERS N & TSAKIROPOULOS P (1988) PREFERENTIAL NUCLEATION IN UNDERCOOLED LIQUID ALUMINUM-ALLOYS. MATER SCI TECH SER, 4(2), 157-160.
  • GOODWIN PS, TSAKIROPOULOS P & SAUNDERS N (1988) THE MICROSTRUCTURE OF RAPIDLY SOLIDIFIED AL-CR-FE POWDER. MATER SCI ENG, 98, 61-64.
  • PRATT RCA, TSAKIROPOULOS P, JONES H, GARDINER RW & RESTALL JE (1987) EFFECT OF DISPERSOID-FORMING ADDITIONS ON THE RESPONSE TO HEAT-TREATMENT OF SPLAT-QUENCHED AL-LI-X ALLOYS. J PHYS-PARIS, 48(C-3), 341-346.
  • BUCKLE ER & TSAKIROPOULOS P (1986) INTERNAL STRUCTURE OF SOLIDIFIED AEROSOL DROPLETS - ZINC. J MATER SCI LETT, 5(10), 981-983.
  • BUCKLE ER, MAWELLA KJA & TSAKIROPOULOS P (1986) PARTICLE CONDENSATION IN THE VAPOR EMITTED BY A HEATED SOURCE. J COLLOID INTERF SCI, 112(1), 42-53.
  • Buckle ER, Tsakiropoulos P & Pointon KC (1986) . International Materials Reviews, 31(1), 258-288.
  • BUCKLE ER, TSAKIROPOULOS P & POINTON KC (1986) PREPARATION AND PROPERTIES OF METALLIC AEROSOL-PARTICLES. INT MATER REV, 31(6), 258-288.
  • Buckle ER, Tsakiropoulos P & Pointon KC (1986) . International Materials Reviews, 31(1), 258-288.
  • TSAKIROPOULOS P (1985) SOLIDIFICATION OF DROPLETS. MATER LETT, 3(12), 508-512.
  • BUCKLE ER & TSAKIROPOULOS P (1985) CONDENSATION AND CRYSTAL MORPHOLOGY OF BISMUTH AEROSOLS. J MATER SCI, 20(10), 3691-3696.
  • TSAKIROPOULOS P (1984) ON THE SOLIDIFICATION OF DROPLETS IN CADMIUM AND ZINC AEROSOLS BY THE FLOATING RAFT MECHANISM. J MATER SCI LETT, 3(12), 1095-1096.
  • TSAKIROPOULOS P (1984) THE INFLUENCE OF ANISOTROPY ON THE LIQUID SOLID-PHASE TRANSITIONS IN PURE METALS .1. THE CASE OF CD AND ZN. J CRYST GROWTH, 69(2-3), 449-455.
  • Buckle ER & Tsakiropoulos P (1981) . Analytical Proceedings, 18(2), 73-76.
  • BUCKLE ER & TSAKIROPOULOS P (1981) EVAPORATION BEHAVIOR OF METALLIC AEROSOL CONDENSATES. J MICROSC-OXFORD, 124(OCT), 89-93.
  • BUCKLE ER & TSAKIROPOULOS P (1981) SOLIDIFICATION OF METALLIC AEROSOL DROPLETS FROM FLOATING RAFTS - A TEST OF THE SPIRAL GROWTH-MECHANISM FOR CD AND ZN. J MATER SCI, 16(4), 1103-1107.
  • BUCKLE ER, POINTON KC & TSAKIROPOULOS P (1980) CRYSTALLOGRAPHY OF METALLIC AEROSOL PRECIPITATES .2. SOLIDIFICATION OF DROPLETS TO SPHERICAL CRYSTALS IN CADMIUM AND ZINC. J MATER SCI, 15(11), 2921-2924.
  • BUCKLE ER & TSAKIROPOULOS P (1979) CRYSTALLOGRAPHY OF METALLIC AEROSOL PRECIPITATES - DENDRITIC ORIGIN OF HEXAGONAL PRISMS IN CD AND ZN. J MATER SCI, 14(6), 1421-1424.
  • Tankov N, Utton C & Tsakiropoulos P () . Alloys, 3(3), 190-231.
  • Tankov N, Utton C & Tsakiropoulos P () . Alloys, 3(1), 59-95.
  • Tsakiropoulos P () . Alloys, 2(3), 184-212.
  • Tsakiropoulos P () . Metals, 13(6), 1023-1023.
  • Tsakiropoulos P () . Materials, 15(23), 8479-8479.
  • Zacharis E, Utton C & Tsakiropoulos P () . Materials, 15(13), 4596-4596.
  • Tsakiropoulos P () . Materials, 15(8), 2832-2832.
  • Zhao J, Utton C & Tsakiropoulos P () . Materials, 13(20), 4548-4548.
  • Zhao J, Utton C & Tsakiropoulos P () . Materials, 13(17), 3719-3719.
  • Hernández-Negrete O & Tsakiropoulos P () . Materials, 13(3), 722-722.
  • Li Z & Tsakiropoulos P () . Materials, 12(19), 3120-3120.
  • Li Z & Tsakiropoulos P () . Materials, 12(17), 2655-2655.
  • Hernández-Negrete & Tsakiropoulos () . Materials, 12(16), 2531-2531.
  • Hernández-Negrete O & Tsakiropoulos P () . Materials, 12(11), 1806-1806.
  • McCaughey C & Tsakiropoulos P () . Materials, 11(6), 967-967.
  • Tsakiropoulos P () . Materials, 11(4), 592-592.
  • Tsakiropoulos P () . Materials, 11(3), 395-395.
  • Tsakiropoulos P () . Materials, 11(1), 69-69.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ () . Advanced Materials Research, 1043, 154-158.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ () . Advanced Materials Research, 1043, 159-164.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ () . Advanced Materials Research, 1043, 149-153.
  • Palmiere EJ, Nurbanasari & Tsakiropoulos P () Influence of high temperature deformation and double tempering on the microstructure of a H21 tool steel. Materials Science and Engineering A.

Book chapters

  • Adkins NJE & Tsakiropoulos P (1991) , Rapidly Quenched Materials (pp. 767-770). Elsevier
  • ADKINS NJE, SAUNDERS N & TSAKIROPOULOS P (1988) , Rapidly Quenched Metals 6 (pp. 217-219). Elsevier
  • GOODWIN PS, TSAKIROPOULOS P & SAUNDERS N (1988) , Rapidly Quenched Metals 6 (pp. 61-64). Elsevier
  • ADKINS NJE, GOODWIN PS & TSAKIROPOULOS P (1988) , Rapidly Quenched Metals 6 (pp. 115-117). Elsevier
  • TSAKIROPOULOS P, PRATT RC, JONES H, RESTALL JE & GARDINER RW (1988) , Rapidly Quenched Metals 6 (pp. 143-147). Elsevier
  • Tsakiropoulos P () John Wiley & Sons, Ltd
  • Grosdidier T, Keramidas P & Tsakiropoulos P () , Materials Development and Processing - Bulk Amorphous Materials, Undercooling and Powder Metallurgy (pp. 265-270). Wiley-VCH Verlag GmbH & Co. KGaA
  • Shao G & Tsakiropoulos P () , Intermetallics and Superalloys (pp. 330-335). Wiley-VCH Verlag GmbH & Co. KGaA
  • Arvanitis A, Whiting MJ & Tsakiropoulos P () , Intermetallics and Superalloys (pp. 345-349). Wiley-VCH Verlag GmbH & Co. KGaA

Conference proceedings

  • DoÄŸan ÖN, Liu X, Tsakiropoulos P, Jablonski PD & Lin J (2015) . Metallurgical and Materials Transactions A, Vol. 46(2) (pp 556-556)
  • Diplas S, Moslemzadeh N, Watts JF, Beamson G & Tsakiropoulos P (2010) . SURFACE AND INTERFACE ANALYSIS, Vol. 42(6-7) (pp 722-725)
  • Moslemzadeh N, Beamson G, Haines SR, Tsakiropoulos P, Watts JF & Weightman P (2006) . SURFACE AND INTERFACE ANALYSIS, Vol. 38(4) (pp 703-706)
  • Kambakas K & Tsakiropoulos P (2005) . MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 413 (pp 538-544)
  • Shao G, Lu B, Liu YQ & Tsakiropoulos P (2005) . INTERMETALLICS, Vol. 13(3-4) (pp 409-414)
  • Moslemzadeh N, Watts JF, Tsakiropoulos P, Beamson G, Haines S & Weightman P (2004) . SURFACE AND INTERFACE ANALYSIS, Vol. 36(8) (pp 1119-1121)
  • Tsakiropoulos P & Shao G (2004) . MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 375-77 (pp 201-206)
  • Shao G & Tsakiropoulos P (2004) . MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 375-77 (pp 556-560)
  • Zaroulias A, Shao GS & Tsakiropoulos P (2003) Synthesis and characterisation of oxidation resistant coating for gamma TiAl. GAMMA TITANIUM ALUMINIDES 2003 (pp 567-574)
  • Zaroulias A, Shao GS & Tsakiropoulos P (2003) Development of oxidation resistant coatings based on gamma TiAl. SURFACE ENGINEERING: IN MATERIALS SCIENCE II (pp 273-281)
  • Abel ML, Tsakiropoulos P, Watts JF & Matthew JAD (2002) . SURFACE AND INTERFACE ANALYSIS, Vol. 34(1) (pp 360-364)
  • Wang SZ, Shao G, Tsakiropoulos P & Wang F (2002) Phase selection in magnetron sputter-deposited TiAl alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 329 (pp 141-146)
  • Shao G & Tsakiropoulos P (2002) Prediction of omega phase formation in Ti-Al-X alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 329 (pp 914-919)
  • Kench PJ, Shannon JM, Shao G, Tsakiropoulos P & Silva SRP (2001) Ion beam synthesis of gallium nitride. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, Vol. 175 (pp 678-682)
  • Shao G & Tsakiropoulos P (2001) Prediction of omega phase formation in TiAl-X alloys. TITANIUM ALLOYS AT ELEVATED TEMPERATURE: STRUCTURAL DEVELOPMENT AND SERVICE BEHAVIOUR, Vol. 755(4) (pp 291-300)
  • Wang SZ, Shao G, Grosdidier T, Bolle B, Wang F & Tsakiropoulos P (2001) Structural development in sputter deposited TiAlCr coatings. STRUCTURAL INTERMETALLICS 2001 (pp 663-668)
  • Arvanitis A, Whiting M & Tsakiropoulos P (2001) A study of the oxidation behaviour of Mo-Si-Al intermetallic alloys at low, intermediate and high temperatures. STRUCTURAL INTERMETALLICS 2001 (pp 561-570)
  • Grosdidier T, Keramidas P & Tsakiropoulos P (2001) Formation and characteristics of banded microstructures in a consolidated AL-Fe based alloy obtained from RS powders. ADVANCED POWDER TECHNOLOGY II, Vol. 189-1 (pp 509-514)
  • Li HP, Tsakiropoulos P & Johnson T (2001) Centrifugal atomisation of alloys. ADVANCED POWDER TECHNOLOGY II, Vol. 189-1 (pp 245-251)
  • Coomber E, Whiting MJ & Tsakiropoulos P (2000) Eutectoid decomposition in three Ti-Co alloys. NUCLEATION AND GROWTH PROCESSES IN MATERIALS, Vol. 580 (pp 93-98)
  • Diplas S & Tsakiropoulos P (2000) Studies of Mg-V and Mg-Zr alloys. MAGNESIUM TECHNOLOGY 2000 (pp 175-180)
  • Mitchell T & Tsakiropoulos P (2000) Microstructure property studies of in situ mechanically worked PVD Mg-Ti alloys. MAGNESIUM TECHNOLOGY 2000 (pp 169-174)
  • Shao G & Tsakiropoulos P (1999) Interplay of thermodynamics and transformation kinetics on microstructural development in TiAl-based alloys. GAMMA TITANIUM ALUMINIDES 1999 (pp 189-194)
  • Shao G, Nguyen-Manh D, Tsakiropoulos P & Pettifor DG (1999) How stable is the omega phase in TiAl-X alloys?. GAMMA TITANIUM ALUMINIDES 1999 (pp 155-159)
  • Tsakiropoulos P (1999) Microstructure-property studies in spray formed Al alloys. ADVANCED POWDER TECHNOLOGY, Vol. 299-3 (pp 392-397)
  • Scholl R, Tsakiropoulos P, Bohm A & Kieback B (1999) Properties of silicides and silicide composites densified by pressureless reactive sintering. ADVANCED POWDER TECHNOLOGY, Vol. 299-3 (pp 165-170)
  • Sandhu S, Tsakiropoulos P, Wood MJ & WardClose CM (1997) Interfacial studies in titanium aluminide SiCf composites. CMMC 96 - PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON CERAMIC AND METAL MATRIX COMPOSITES, PTS 1 AND 2, Vol. 127- (pp 671-678)
  • Diplas S, Tsakiropoulos P, Brydson RMD, Dodd S & Gardiner RW (1997) Characterisation of physical vapour deposited Mg-V alloys. PROCEEDINGS OF THE THIRD INTERNATIONAL MAGNESIUM CONFERENCE (pp 285-298)
  • Baliga CB, Tsakiropoulos P, Dodd SB & Gardiner RW (1997) Physical vapour deposited Mg-Ti alloys. PROCEEDINGS OF THE THIRD INTERNATIONAL MAGNESIUM CONFERENCE (pp 627-636)
  • Baker MA, Tsakiropoulos P & Norman AF (1997) Porosity and oxide distribution in spray-formed Al-5Cr-1.5Zr alloy. JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, Vol. 5(1) (pp 105-110)
  • Li HP & Tsakiropoulos P (1997) Calculation of powder size in centrifugal atomization and spray forming. JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, Vol. 5(1) (pp 117-121)
  • Norman AF & Tsakiropoulos P (1997) Study of the microstructure and properties of spray-formed Al-5Cr-1.5Zr. JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, Vol. 5(1) (pp 59-63)
  • CoastSmith L, Brydson R, Tsakiropoulos P, Dunford D & WardClose CM (1996) Synthesis and characterisation of titanium/aluminum nanolaminates. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 156(1-3) (pp 17-18)
  • Keramidas P, Haag R, Grosdidier T, Tsakiropoulos P & Wagner F (1996) Influence of Zr addition on the microstructure and properties of PM Al-8Fe-4Ni alloy. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 629-634)
  • Hoo N, Froes FH, Goodwin PS, WardClose CM, Brydson RM & Tsakiropoulos P (1996) Synthesis of a 8-TiAl alloy by mechanical alloying and hot isostatic pressing. HOT ISOSTATIC PRESSING, CONFERENCE PROCEEDINGS (pp 91-95)
  • Shao G & Tsakiropoulos P (1996) Calculation of phase competition and selection in solidification using a combined nucleation and calphad approach. THERMODYNAMICS AND KINETICS OF PHASE TRANSFORMATIONS, Vol. 398 (pp 45-50)
  • Shao G, Tsakiropoulos P & Shen N (1996) Solidification of Al-7Si-2Ti-2Ce alloy ribbons. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 213-218)
  • Shao G & Tsakiropoulos P (1996) Transient nucleation effects on extension of solid solubility in Al-Ti and Al-Zr alloys. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 229-234)
  • Whiting MJ & Tsakiropoulos P (1996) Process/microstructure studies of Mo(Si,Al)(2) and Nb(Si,Al)(2) intermetallics. PROCESSING AND FABRICATION OF ADVANCED MATERIALS IV (pp 129-137)
  • Passa E, Shao G & Tsakiropoulos P (1996) Oxidation studies of Nb-17Al-xMo alloys. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 375-381)
  • Upadhyaya D, Tsakiropoulos P, Ward-Close CM & Froes FH (1996) Recent advances in fiber coating technology for use in SiC/Ti-MMCs. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 225-232)
  • Senkov ON, Srisukhumbowornchai N, Ovecoglu ML, Hoo N, Ward-Close CM, Goodwin P, Tsakiropoulos P & Froes FH (1996) Characterization of a Ti-48Al-2Nb-2Cr alloy synthesized from mixed gas atomized and mechanically alloyed powders. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 271-277)
  • Passa E, Shao G & Tsakiropoulos P (1996) On the development of Nb-17Al-xMo alloys. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 355-362)
  • Norman AF & Tsakiropoulos P (1996) Study of the microstructure and properties of spray formed Al-5Cr-1.5Zr. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 119-126)
  • Shao G, Tsakiropoulos P, Loader C, Dunford D & Ward-Close MC (1996) Microstructure studies on Fe-Al laminate materials. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 149-156)
  • Shao G, Passa E, Tsakiropoulos P, Miodownik AP, Manh DN & Pettifor DG (1996) Effects of Al on omega formation in transition metal intermetallic alloys. STRUCTURAL INTERMETALLICS 1997 (pp 825-830)
  • Stergiou A & Tsakiropoulos P (1996) Oxidation studies on MoSi2-X (X=Al, Ta, W) alloys. STRUCTURAL INTERMETALLICS 1997 (pp 869-875)
  • Keramidas P, Grosdidier T & Tsakiropoulos P (1996) Influence of Zr addition on the microstructure and properties of PM Al-8Fe-4Ni alloy. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 111-118)
  • Shao G, Tsakiropoulos P & Miodownik AP (1995) Study of phase transformations in Ti-47Al-3V. GAMMA TITANIUM ALUMINIDES (pp 173-180)
  • UPADHYAYA D, SANDHU S, WARDCLOSE CM, TSAKIROPOULOS P & FROES FH (1995) A COMPARISON OF SCS6 TI-6AL-4V AND SIGMA (SM1240) TI-6AL-4V COMPOSITE SYSTEMS - A REACTION KINETICS STUDY. RECENT ADVANCES IN TITANIUM METAL MATRIX COMPOSITES (pp 155-165)
  • UPADHYAYA D, TSAKIROPOULOS P, WARDCLOSE CM & FROES FH (1995) EFFECT OF PROCESSING ON THE FIBER SURFACE MORPHOLOGY. RECENT ADVANCES IN TITANIUM METAL MATRIX COMPOSITES (pp 75-85)
  • Brydson R, Hofer F, Upadhyaya D, Kothleitner G, Tsakiropoulos P, WardClose CM & Froes FH (1995) EELS imaging studies of fibre-reinforced metal matrix composites. ELECTRON MICROSCOPY AND ANALYSIS 1995, Vol. 147 (pp 191-194)
  • UPADHYAYA D, BRYDSON R, TSAKIROPOULOS P, WARDCLOSE CM & FROES FH (1995) A COMPARISON OF SCS6 TI-6AL-4V AND SIGMA SM1240 TI-6AL-4V COMPOSITE SYSTEMS - A MICROSTRUCTURAL CHARACTERIZATION. RECENT ADVANCES IN TITANIUM METAL MATRIX COMPOSITES (pp 139-154)
  • PITMAN SH & TSAKIROPOULOS P (1995) STUDY OF THE MICROSTRUCTURE AND OXIDATION OF NBSI2 BASE ALLOYS. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 1321-1326)
  • SHAO G, TSAKIROPOULOS P & MIODOWNIK AP (1995) METASTABLE PHASE TRANSFORMATIONS IN TI-40AL-10V ALLOY. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 187-192)
  • PASSA E & TSAKIROPOULOS P (1995) THE MICROSTRUCTURE OF NB3AL-MO INTERMETALLICS. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 1353-1358)
  • STERGIOU A & TSAKIROPOULOS P (1995) STUDY OF THE EFFECTS OF AL, TA, W ADDITIONS ON THE MICROSTRUCTURE AND PROPERTIES OF MOSI2 BASE ALLOYS. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 911-916)
  • SHAO G, GROSDIDIER T & TSAKIROPOULOS P (1993) TEM INVESTIGATION OF RAPIDLY QUENCHED METASTABLE GAMMA-TIAL PHASES. JOURNAL DE PHYSIQUE IV, Vol. 3(C7) (pp 465-468)
  • SHAO G, GROSDIDIER T & TSAKIROPOULOS P (1993) SOLIDIFICATION AND METASTABLE PHASE-FORMATION IN CONVENTIONAL AND PLANAR FLOW CAST TI-48.8AT-PERCENT-AL-2.2AT-PERCENT-V. JOURNAL DE PHYSIQUE IV, Vol. 3(C7) (pp 377-382)
  • UPADHYAYA D, BAKER MA, WARDCLOSE CM, TSAKIROPOULOS P & FROES FH (1993) INTERFACE STUDIES IN A TI-6AL-4V-SIGMA FIBER-COMPOSITE. JOURNAL DE PHYSIQUE IV, Vol. 3(C7) (pp 1717-1722)
  • NORMAN AF & TSAKIROPOULOS P (1992) THE MICROSTRUCTURE AND PROPERTIES OF THE PM AL-2.6LI-1.6HF ALLOY. ALUMINIUM-LITHIUM, VOLS 1 AND 2 (pp 507-512)
  • HEHMANN F & TSAKIROPOULOS P (1992) MICROSTRUCTURAL MODELING FOR THE DEVELOPMENT OF LASER-TREATED, GAS-ATOMIZED AND SPRAY-FORMED MAGNESIUM ALLOYS. MAGNESIUM ALLOYS AND THEIR APPLICATIONS (pp 535-542)
  • BALIGA CB & TSAKIROPOULOS P (1992) DESIGN OF MAGNESIUM ALLOYS WITH IMPROVED CORROSION PROPERTIES. MAGNESIUM ALLOYS AND THEIR APPLICATIONS (pp 119-126)
  • BALIGA CB, TSAKIROPOULOS P, WATTS JF & JEYNES C (1992) EFFECT OF PROCESSING ON THE STRUCTURE OF THE SURFACES OF MG-AL ALLOYS. MAGNESIUM ALLOYS AND THEIR APPLICATIONS (pp 191-198)
  • ADKINS NJE & TSAKIROPOULOS P (1991) RAPID SOLIDIFICATION OF AL-CR-ZR-MN ALLOYS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1158-1161)
  • NORMAN AF & TSAKIROPOULOS P (1991) THE MICROSTRUCTURE AND PROPERTIES OF RAPIDLY SOLIDIFIED AL-HF ALLOYS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1234-1237)
  • BALIGA CB & TSAKIROPOULOS P (1991) THE STRUCTURE AND MORPHOLOGY OF THE CORROSION PRODUCTS FORMED ON THE SURFACES OF A RAPIDLY SOLIDIFIED MG-35 AL-ALLOY. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1029-1032)
  • NORMAN AF & TSAKIROPOULOS P (1991) THE MICROSTRUCTURE AND PROPERTIES OF HIGH-PRESSURE GAS-ATOMIZED AL-LI-HF ALLOY POWDERS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1144-1147)
  • ADKINS NJE & TSAKIROPOULOS P (1991) THE DISTRIBUTION OF HETEROGENEOUS NUCLEANTS IN AL-CR ALLOY POWDERS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 133 (pp 767-770)
  • Souza AC, Rossi JL, Tsakiropoulos P, Martinez LG, Grandini CR, Ceoni FC, Mucsi CS & Correa HPS () . Materials Science Forum, Vol. 869 (pp 578-584)
Professional activities and memberships
  • Member of the Refractory Metals and Materials Committee, TMS
  • Member of EPSRC Materials College
  • Adviser to overseas Academies of Science, Research Councils and Research Agencies on Materials R&D
  • Adviser to International Metals/Materials Associations on Materials research, teaching and continuous professional development
  • Adviser to overseas Universities on Engineering research and teaching
  • Bodossaki Foundation Award, 1975
  • Burton Medal and Prize, University of Sheffield, 1981
  • Elegant Work Prize, IoM, 1995