Professor Eric J Palmiere

BS MS PhD CEng

School of Chemical, Materials and Biological Engineering

POSCO Chair in Technology of Iron and Steel

Research theme lead - Materials Discovery and Characterisation

Profile photo of Eric Palmiere
Profile picture of Profile photo of Eric Palmiere
e.j.palmiere@sheffield.ac.uk
+44 114 222 5978
Sir Robert Hadfield Building

Full contact details

Professor Eric J Palmiere
School of Chemical, Materials and Biological Engineering
Sir Robert Hadfield Building
Mappin Street
Sheffield
S1 3JD
Profile

I am an internationally recognised leader in ferrous physical metallurgy and thermomechanical processing, with more than 35 years of experience. I have conducted research in association with many national and international companies from a wide variety of sectors including automotive, aerospace, construction, transportation and energy, including nuclear and most recently fusion. I have been a collaborator with the National Physical Laboratory on the development of Guides for Best Practice of High Temperature Testing, and has published >170 scientific papers in high impact journals. I have been the recipient of the IOM3 Charles Hatchett Award, and most recently been presented with the 2024 Tom Colclough Medal by the IOM3 in recognition of my contributions to the understanding of microstructure, mechanical properties and processing in the iron and steel industry.

Research interests

My research involves the microstructural evolution (utilising experimental techniques together with modelling techniques), and the subsequent development of mechanical properties during the thermomechanical processing of both ferrous and nonferrous alloys. In my research, a wide range of mechanical tests are employed, including laboratory simulations of industrial metalworking processes, e.g. rolling, forging, extrusion etc.

Additionally, this research relies upon the quantitative characterisation of microstructure using a number of different techniques including light, scanning and transmission electron microscopy. This work has led to empirical relationships between deformation processing parameters (e.g., temperature, strain, strain rate and interpass delay time) and the resultant microstructure for a given alloy composition. Although a number of alloy systems including aluminium alloys, metal matrix composites (MMCs), titanium aluminides and permanent magnetic materials have been studied, the focus is primarily on ferrous alloys such as stainless, microalloyed steels and associated model alloy steels.

My work on the thermodynamic behaviour of NbC, and of its subsequent precipitation behaviour in microalloyed austenite has been recognised internationally, with the award of the Charles Hatchett Prize from the Institute of Materials (1995). I am particularly interested in developing a basic understanding between those softening (i.e., recovery, recrystallisation) and strengthening (i.e., solid solution, precipitation) mechanisms which occur either in austenite or in ferrite.

Key projects:

  • Characterisation and modelling of strain-induced precipitation in steels
  • Development of constitutive behaviour during moderate strain rate testing of steels at hot and warm working temperatures
  • Influence of processing parameters, strain path and cooling rate on the microstructural evolution and transformation behaviour in pipeline steels API X70, X80 and X100
  • Assessment and characterisation of friction effects during multipass hot deformation
  • Deformation induced ferrite transformation leading to ultra-fine ferrite microstructures
  • Influence of strain path on precipitation and recrystallisation of HSLA steels
  • Modelling the nucleation, growth and coarsening kinetics of gamma during the heat treatment of Ni-based alloys
  • Microstructural evolution during the thermomechanical processing of Ni-based alloys
  • Development and processing of high modulus steels for automotive applications
  • Alloy development and thermomechanical processing of advanced reduced activated ferritic-martensitic steels for fusion energy
Publications

Books

  • Palmiere (2012) Recrystallization and Grain Growth IV. Trans Tech Publication.
  • Palmiere EJ (2003) International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control.

Edited books

  • Palmiere EJ & Wynne BP (Ed.) (2012) Recrystallization and Grain Growth IV. Trans Tech Publications inc.

Journal articles

  • Mart穩nez EP & Palmiere EJ (2024) . Metals, 14(3).
  • Collins J, Taylor M, Scarlett AL, Palmiere EJ & Pickering EJ (2024) . Materials Characterization, 208.
  • RodriguezGaleano KF, RomanoAcosta LF, Palmiere EJ & Rainforth WM (2022) . Journal of Microscopy.
  • Rakshe B, Patel J & Palmiere EJ (2022) . Metallurgical and Materials Transactions A, 53(8), 3143-3157.
  • Romano-Acosta LF, Garc穩a-Rincon O, Pedraza JP & Palmiere EJ (2021) . Journal of Materials Science, 56(33), 18710-18721.
  • Muszka K, Sitko M, Lisiecka-Graca P, Simm T, Palmiere E, Schmidtchen M, Korpala G, Wang J & Madej L (2021) . Metals, 11(1).
  • Thackray R, Palmiere EJ & Khalid O (2020) . Materials, 13(15).
  • Zhao H & Palmiere EJ (2019) . Materials Characterization, 158.
  • Zhao H & Palmiere EJ (2018) . Materials Characterization, 145(Mater. Sci. Eng. A 335 2002), 479-489.
  • Gong P, Sun L, Wynne BP, Palmiere EJ & Rainforth WM (2018) . Journal of Materials Science, 53, 6922-6938.
  • Zhao H, Wynne BP & Palmiere EJ (2018) . Journal of Materials Science, 53(5), 3785-3804.
  • Zhao H & Palmiere EJ (2017) . Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
  • Sun L, Muszka K, Wynne BP & Palmiere EJ (2017) . Journal of Materials Science, 52(20), 12427-12444.
  • Moore IJ, Burke MG, Nuhfer NT & Palmiere EJ (2017) . Journal of Materials Science, 52(14), 8665-8680.
  • Zhao H & Palmiere EJ (2017) . Metallurgical and Materials Transactions A, 48(7), 3389-3399.
  • Gong P, Palmiere EJ & Rainforth WM (2017) . Materials Characterization, 124, 83-89.
  • Moore IJ, Taylor JI, Tracy MW, Burke MG & Palmiere EJ (2017) . Materials Science and Engineering: A, 682, 402-409.
  • Zhao H, Wynne BP & Palmiere EJ (2017) . Materials Characterization, 123, 339-348.
  • Zhao H, Wynne BP & Palmiere EJ (2017) . Materials Characterization, 123, 128-136.
  • Moore IJ, Burke MG & Palmiere EJ (2016) . Acta Materialia, 119, 157-166.
  • Gong P, Palmiere EJ & Rainforth WM (2016) . Acta Materialia, 119, 43-54.
  • Gong P, Palmiere EJ & Rainforth WM (2015) . Acta Materialia, 97, 392-403.
  • Bull L, Palmiere EJ, Thackray RP, Burgess IW & Davison B (2015) . Journal of Structural Fire Engineering, 6(3), 197-212.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ (2015) . International Journal of Minerals, Metallurgy, and Materials, 22(3), 272-284.
  • Palmiere EJ, Muszka K, Graca P & Simm T (2014) Study of the Effect of Cyclic Strain Reversal on the Interactions Between SRX and PPT in the Microalloyed Austenite During Hot Rolling. Key Engineering Materials, 622-623, 1023-1030.
  • Muszka KS, Dziedzic D, Madej L, Majta J, Hodgson PD & Palmiere EJ (2014) . Materials Science and Engineering A, 610, 290-296.
  • Sun L, Muszka KS, Wynne BP & Palmiere EJ (2014) . Metallurgical and Materials Transactions A, 45(8), 3619-3630.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ (2014) . Transactions of the Indian Institute of Metals.
  • Mehtonen SV, Palmiere EJ, Misra RDK, Karjalainen LP & Porter DA (2014) . Materials Science and Engineering A, 601, 7-19.
  • Sun L, Muszka K, Wynne BP & Palmiere EJ (2014) . Acta Materialia, 66, 132-149.
  • Mehtonen S, Palmiere E, Misra D, Karjalainen P & Porter D (2014) . ISIJ International, 54(6), 1406-1415.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ (2014) . ISIJ International, 54(7), 1667-1676.
  • Muszka K, Madej L, Graca P, Sitko M, Sun L & Palmiere EJ (2013) Multiscale modeling of the effect of strain reversal on the deformation behavior of FCC structure using combined 3D digital materials representation and crystal plasticity approach. Materials Science and Technology Conference and Exhibition 2013 MS and T 2013, 3, 1668-1675.
  • Sun L, Muszka K, Wynne BP & Palmiere EJ (2013) . Materials Science and Engineering A, 568, 160-170.
  • Dziedzic D, Muszka K, Majta J & Palmiere EJ (2013) . Materials Science Forum, 753, 542-545.
  • Muszka K, Madej L, Simm T, Palmiere E, Rainforth WM & Sun L (2012) Numerical study of the effects of strain path change on the hot deformation behavior of microalloyed austenite model alloy using multiscale approach. Materials Science and Technology Conference and Exhibition 2012 MS and T 2012, 1, 685-692.
  • Sun L, Muszka K, Wynne BP & Palmiere EJ (2012) . Materials Science Forum, 715-716, 667-672.
  • Das S, Abbod MF, Zhu Q, Palmiere EJ, Howard IC, Linkens DA & Sellars CM (2012) . Materials Science Forum, 715-716, 416-426.
  • Hinton JS, Palmiere EJ & Rainforth WM (2012) . Materials Science Forum, 715-716, 907-912.
  • Muszka K, Sun L, Wynne BP, Palmiere EJ & Rainforth WM (2012) . Materials Science Forum, 715-716, 655-660.
  • Hinton JS, Palmiere E & Mark Rainforth W (2012) The effect of intercritical processing parameters on the microstructure development in a microalloyed plate steel. Steel Research International, SPL. ISSUE, 1159-1162.
  • Dziedzic D, Muszka K, Majta J & Palmiere EJ (2012) Effect of strain-induced reverse transformation on austenite morphology of microalloyed steel. Steel Research International, SPL. ISSUE, 1255-1258.
  • Xiao B, Palmiere EJ, Howe AA & Carey HC (2012) . Advanced Materials Research, 409, 443-448.
  • Xiao B, Palmiere EJ, Howe AA & Carey HC (2011) Multi-Pass Simulation of Heavy Plate Rolling Including Intermediate Forced Cooling. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 18, 506-510.
  • Sun L, Muszka K, Wynne BP & Palmiere EJ (2010) The effect of strain path reversal on high-angle boundary formation by grain subdivision in a model austenitic steel. Scripta Materialia.
  • Sun L, Thomas MJ, Wynne BP, Palmiere EJ, Mingard KP & Roebuck B (2010) . Materials Science and Technology, 26(12), 1477-1486.
  • Yang X, Salem M & Palmiere EJ (2010) . MATERIALS AND MANUFACTURING PROCESSES, 25(1-3), 48-53.
  • Funahashi S & Palmiere EJ (2010) . Advanced Materials Research, 89-91, 745-750.
  • Sun L, Wynne BP & Palmiere EJ (2010) . Advanced Materials Research, 89-91, 721-726.
  • Palmiere EJ, Bai F, Poths RM, Turner J, Nagarajan V, Wynne BP & Rainforth WM (2010) . THERMEC 2009, PTS 1-4, 638-642, 2694-2699.
  • Muszka K, Sun L, Wynne BP, Palmiere EJ & Rainforth WM (2010) . THERMEC 2009, PTS 1-4, 638-642, 3418-3423.
  • Muszka K, Wynne BP, Palmiere EJ & Rainforth WM (2010) Effect of Deformation Mode on Microstructure Evolution in Nb-Microalloyed Steel. STEEL RESEARCH INTERNATIONAL, 81(9), 70-73.
  • Salem M, Al-Muaili SM & Palmiere EJ (2009) The effect of processing conditions and cooling rate on API X-70 and X-100 grade steels. Materials Science and Technology Conference and Exhibition 2009 MS and T 09, 3, 1644-1651.
  • Palmiere E (2009) . Materials Science and Technology, 25(9), 1065-1065.
  • Nagarajan V, Palmiere EJ & Sellars CM (2009) . MATER SCI TECH-LOND, 25(9), 1168-1174.
  • Omar M, Atkinson H, Howe A, Palmiere E, Kapranos P & Ghazali M (2009) . J MATER SCI, 44(3), 869-874.
  • Nagarajan V, Palmiere EJ & Sellars CM (2008) Strain-induced precipitation of Nb(C,N) in austenite during multipass deformation in microalloyed steels. 3rd International Conference on Thermomechanical Processing of Steels Tmp 2008.
  • Adulyasirikul A & Palmiere EJ (2008) High strain rate deformation of an interstitial-free steel during warm working. 3rd International Conference on Thermomechanical Processing of Steels Tmp 2008.
  • Cobo SJ, Palmiere EJ & Rainforth WM (2008) . METALL MATER TRANS A, 39A(10), 2477-2485.
  • Vishwanafhan N, Sellars CM & Palmiere EJ (2007) A new approach for modelling strain-induced precipitation of Nb(CN) in austenite during multi-pass hot rolling. 2007 International Conference on Microalloyed Steels Processing Microstructure Properties and Performance Proceedings, 139-149.
  • Thomas MJ, Wynne BP, Palmiere EJ, Mingard KP & Roebuck B (2007) An investigation of microstructure inhomogeneity in Waspaloy subjected to plane strain compression testing. Recrystallization and Grain Growth III, Pts 1 and 2, 558-559, 589-594.
  • Das S, Abbod MF, Zhu Q, Palmiere EJ, Howard IC & Linkens DA (2007) . COMP MATER SCI, 40(3), 366-375.
  • Mingard KP, Roebuck B, Bennett EG, Thomas M, Wynne BP & Palmiere EJ (2007) . J Microsc, 227(Pt 3), 298-308.
  • Mingard KP, Roebuck B, Bennett EG, Thomas M, Wynne BP & Palmiere EJ (2007) Metrological aspects of Electron Backscattering Diffraction in characterising hot deformation grain structures. MAPAN-J METROL SOC I, 22(3), 177-200.
  • Loveday MS, Mahon GJ, Roebuck B, Lacey AJ, Palmiere EJ, Sellars CM & van der Winden MR (2006) Measurement of flow stress in hot plane strain compression tests. MATER HIGH TEMP, 23(2), 85-118.
  • Omar MZ, Atkinson HV, Palmiere EJ, Howe AA & Kapranos P (2006) Viscosity - shear rate relationship during the thixoforming of HP9/4/30 steel. SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES, 116-117, 677-680.
  • Das S, Howard IC & Palmiere EJ (2006) A probabilistic approach to model interfacial phenomena during hot flat rolling of steels. ISIJ INT, 46(4), 560-566.
  • Loveday MS, Mahon GJ, Roebuck B, Lacey AJ, Palmiere EJ, Sellars CM & van der Winden MR (2006) . Materials at High Temperatures, 23(2), 85-118.
  • Das S, Shterenlikht A, Howard IC & Palmiere EJ (2006) . P R SOC A, 462(2071), 2085-2096.
  • Yu WH, Palmiere EJ, Bank SP & Han JT (2005) Cellular automata modeling of grain coarsening during reheating and validation with the experimental results. Acta Metallurgica Sinica English Letters, 18(2), 113-120.
  • Omar MZ, Palmiere EJ, Howe AA, Atkinson HV & Kapranos P (2005) . MAT SCI ENG A-STRUCT, 395(1-2), 53-61.
  • Yu WH, Palmiere EJ, Banks SP & Han JT (2005) Cellular automata modelling of grain coarsening during reheating - II. Abnormal grain growth. J UNIV SCI TECHNOL B, 12(1), 26-32.
  • Cizek P, Bai F, Palmiere EJ & Rainforth WM (2005) . J Microsc, 217(Pt 2), 138-151.
  • Omar MZ, Atkinson HV, Palmiere EJ, Howe AA & Kapranos P (2004) Microstructural development of HP9/4/30 steel during partial remelting. STEEL RES INT, 75(8-9), 552-560.
  • Omar MZ, Palmiere EJ, Howe AA, Atkinson HV & Kapranos P (2004) Thixoforming of GFM M2 tool steel from the As-annealed condition. Proceedings of the 8th International Conference on Semi Solid Processing of Alloys and Composites S2p 2004, 521-531.
  • Das S, Palmiere EJ & Howard IC (2004) . Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 35(13), 1087-1095.
  • Yu WH, Palmiere EJ, Banks SP & Han JT (2004) Cellular automata modelling of austenite grain coarsening during reheating - I. Normal grain coarsening. J UNIV SCI TECHNOL B, 11(6), 517-523.
  • Das S, Palmiere EJ & Howard IIC (2004) . Metallurgical and Materials Transactions A, 35(3), 1087-1095.
  • Das S, Palmiere EJ & Howard IC (2004) The cut-groove technique to infer interfacial effects during hot rolling. METALL MATER TRANS A, 35A(3A), 1087-1095.
  • Bai F, Cizek P, Palmiere EJ, Rainforth WM & Beynon JH (2003) Microstructural evolution in a model Fe-30wt%Ni alloy during hot plane-strain compression. THERMEC'2003, PTS 1-5, 426-4, 3623-3628.
  • Palmiere EJ & Dutta B (2003) Strain-induced precipitation of Nb(CN) in low carbon steels: Modelling and experimental validation. THERMEC'2003, PTS 1-5, 426-4, 1237-1242.
  • Dutta B & Palmiere EJ (2003) Effect of prestrain and deformation temperature on the recrystallization behavior of steels microalloyed with niobium. METALL MATER TRANS A, 34A(6), 1237-1247.
  • Higginson RL, Roebuck B & Palmiere EJ (2002) Texture development in oxide scales on steel substrates. SCRIPTA MATER, 47(5), 337-342.
  • Higginson RL, MacGregor A & Palmiere EJ (2002) Strain path effects on texture development in aluminium. ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 396-4, 303-308.
  • Rainforth WM, Black MP, Higginson RL, Palmiere EJ, Sellars CM, Prabst I, Warbichler P & Hofer F (2002) Precipitation of NbC in a model austenitic steel. ACTA MATER, 50(4), 735-747.
  • Das S, Palmiere EJ & Howard IC (2001) Effect of friction on deformation during rolling as revealed by embedded pin technique. MATER SCI TECH-LOND, 17(7), 864-873.
  • Dutta B, Palmiere EJ & Sellars CM (2001) Modelling the kinetics of strain induced precipitation in Nb microalloyed steels. ACTA MATER, 49(5), 785-794.
  • Poths RM, Higginson RL & Palmiere EJ (2001) Complex precipitation behaviour in a microalloyed plate steel. SCRIPTA MATER, 44(1), 147-151.
  • Dutta B & Palmiere EJ (2001) Influence of strain and deformation temperature on the static recrystallisation behaviour of microalloyed austenite. RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2, 1095-1100.
  • Black MP, Rainforth WM & Palmiere EJ (2001) Microstructural development in microalloyed austenite in response to thermomechanical processing. RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2, 1179-1184.
  • Yu W, Banks SP & Palmiere EJ (2001) Analysis of grain growth kinetics using the Cellular Automaton method. RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2, 333-338.
  • Xu H & Palmiere EJ (1999) Particulate refinement and redistribution during the axisymmetric compression of an Al/SiCp metal matrix composite. COMPOS PART A-APPL S, 30(3), 203-211.
  • HOYDICK DP, PALMIERE EJ & SOFFA WA (1997) . ChemInform, 28(36).
  • Palmiere EJ & Xu H (1997) Microstructural Evolution of Reinforcing Media in a Metal Matrix Composite During Hot Deformation. Microstructural Science, 24, 106-114.
  • Hoydick DP, Palmiere EJ & Soffa WA (1997) Microstructural development in MnAl-base permanent magnet materials: New perspectives. JOURNAL OF APPLIED PHYSICS, 81(8), 5624-5626.
  • Hoydick DP, Palmiere EJ & Soffa WA (1997) On the formation of the metastable L1(0) phase in manganese-aluminum-base permanent magnet materials. SCRIPTA MATER, 36(2), 151-156.
  • Anderson JW, Patel A, Nettleship I & Palmiere EJ (1997) Platelet orientation in slip cast ceramic matrix composites. ADV COMPOS LETT, 6(1), 9-11.
  • Patel A, Nettleship I & Palmiere EJ (1997) The use of image analysis in the characterization of partially oriented ceramic matrix composites. MATER CHARACT, 39(1), 15-23.
  • Hutchison WG & Palmiere EJ (1996) Microstructural development in a metal matrix composite during thermomechanical processing. MATER T JIM, 37(3), 330-335.
  • Palmiere EJ, Garcia CI & DeArdo AJ (1996) The influence of niobium supersaturation in austenite on the static recrystallization behavior of low carbon microalloyed steels. METALL MATER TRANS A, 27(4), 951-960.
  • KARNEZIS PA, DURRANT G, CANTOR B & PALMIERE EJ (1995) MECHANICAL-PROPERTIES AND MICROSTRUCTURE OF TWIN-ROLL CAST AL-7SI/SICP MMCS. MATER SCI TECH SER, 11(8), 741-751.
  • Karnezis PA, Durrant G, Cantor B & Palmiere EJ (1995) . Materials Science and Technology, 11(8), 741-752.
  • PALMIERE EJ, GARCIA CI & DEARDO AJ (1994) COMPOSITIONAL AND MICROSTRUCTURAL CHANGES WHICH ATTEND REHEATING AND GRAIN COARSENING IN STEELS CONTAINING NIOBIUM. METALL MATER TRANS A, 25(2), 277-286.
  • Palmiere EJ, Garcia CI & DeArdo AJ (1987) OPTIMIZING BULK AND SURFACE PROPERTIES OF MICROALLOYED FORGING STEELS UTILIZING INNOVATIVE ALLOY DESIGN AND THERMOMECHANICAL PROCESSING PRINCIPLES.. undefined, 567-584.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ () . Advanced Materials Research, 1043, 154-158.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ () . Advanced Materials Research, 1043, 159-164.
  • Nurbanasari M, Tsakiropoulos P & Palmiere EJ () . Advanced Materials Research, 1043, 149-153.
  • Palmiere EJ, Nurbanasari & Tsakiropoulos P () Influence of high temperature deformation and double tempering on the microstructure of a H21 tool steel. Materials Science and Engineering A.
  • Roebuck B, Mingard KP, Brooks M, Palmiere EJ, Wynne BP & Thomas MJ () . Computer Methods in Materials Science, 406-415.

Book chapters

  • Palmiere EJ (2015) In The Chinese Society for Metals (CSM) & Chinese Academy of Engineering (CAE) (Ed.), HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015 (pp. 1095-1101). John Wiley & Sons, Inc.
  • Zhao H, Gray JM & Palmiere EJ () , HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015 (pp. 775-781). John Wiley & Sons, Inc.
  • Cui Z, Patel J & Palmiere EJ () , HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015 (pp. 281-287). John Wiley & Sons, Inc.
  • Muszka K, Kwiecie M, Majta J & Palmiere EJ () , HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015 (pp. 253-259). John Wiley & Sons, Inc.
  • Han SY, Higginson RL & Palmiere EJ () , Materials Science Forum (pp. 195-200). Trans Tech Publications Ltd.
  • Thomas MJ, Wynne BP, Palmiere EJ, Mingard KP & Roebuck B () , Materials Science Forum (pp. 589-594). Trans Tech Publications Ltd.
  • Sellars CM & Palmiere EJ () , Materials Science Forum (pp. 3-14). Trans Tech Publications Ltd.
  • Poths RM, Rainforth WM & Palmiere EJ () , Materials Science Forum (pp. 139-146). Trans Tech Publications Ltd.

Conference proceedings

  • Rakshe B, Patel J & Palmiere EJ (2016) . Materials Science Forum, Vol. 879 (pp 1546-1551), 29 May 2016 - 3 June 2016.
  • Zhao H, Gray JM & Palmiere EJ (2016) (pp 775-781)
  • Cui Z, Patel J & Palmiere EJ (2016) (pp 281-287)
  • Muszka K, Kwiecie M, Majta J & Palmiere EJ (2016) (pp 253-259)
  • Palmiere EJ (2016) (pp 1095-1101)
  • Muszka K, Sroka J, Sun L, Wynne B & Palmiere E (2016) . Advances in Materials and Processing Technologies, Vol. 2(1) (pp 143-151)
  • Muszka K, Sitko M, Perzynski K, Madej L & Palmiere EJ (2014) Multiscale modeling of static recrystallization during multi-pass hot rolling. Materials Science and Technology Conference and Exhibition 2014 MS and T 2014, Vol. 2 (pp 1319-1326)
  • Han SY, Higginson RL & Palmiere EJ (2007) The effect of grain size and rolling reduction on the texture development of a metastable austenitic stainless steel. Recrystallization and Grain Growth III, Pts 1 and 2, Vol. 558-559 (pp 195-200)
  • Sellars CM & Palmiere EJ (2005) Modelling strain induced precipitation of niobium carbonitride during multipass deformation of austenite. MICROALLOYING FOR NEW STEEL PROCESSES AND APPLICATIONS, Vol. 500-501 (pp 3-14)
  • Poths RM, Rainforth WM & Palmiere EJ (2005) Strain induced precipitation in model and conventional microalloyed steels during thermomechanical processing. MICROALLOYING FOR NEW STEEL PROCESSES AND APPLICATIONS, Vol. 500-501 (pp 139-145)
  • Das S, Palmiere EJ & Howard IC (2004) Modelling recrystallisation during thermomechanical processing using CAFE. RECRYSTALLIZATION AND GRAIN GROWTH, PTS 1 AND 2, Vol. 467-470 (pp 623-628)
  • Bai F, Cizek P, Palmiere EJ & Rainforth WM (2004) Characteristics of the deformed and recrystallised grains obtained after hot plane strain compression of a model Fe-30wt%Ni alloy. RECRYSTALLIZATION AND GRAIN GROWTH, PTS 1 AND 2, Vol. 467-470 (pp 21-26)
  • Yu W, Wright CD, Banks SP & Palmiere EJ (2003) . IEE PROCEEDINGS-SCIENCE MEASUREMENT AND TECHNOLOGY, Vol. 150(5) (pp 211-213)
  • Poths RM, Rainforth WM & Palmiere EJ (2003) Investigating precipitation in microalloyed austenite during thermomechanical processing. THERMEC'2003, PTS 1-5, Vol. 426-4 (pp 1255-1260)
  • Palmiere EJ, Sellars CM & Subramanian SV (2001) Modelling of thermomechanical rolling. NIOBIUM: SCIENCE & TECHNOLOGY (pp 501-526)
  • Das S, Palmiere EJ & Howard IC (2001) Interfacial modelling of hot rolling: A probabilistic approach. COMPUTATIONAL MODELING OF MATERIALS, MINERALS AND METALS PROCESSING (pp 613-622)
  • Palmiere EJ (2001) Metallography Via Deformation Simulations. Quantitative Microscopy of High Temperature Materials (pp 445-452). London, 22 November 1999 - 24 November 1999.
  • Poths RM, Higginson RL & Palmiere EJ (2001) A study of the dissolution and precipitation of microalloy elements in HSLA steels. ELECTRON MICROSCOPY AND ANALYSIS 2001(168) (pp 207-210)
  • Poths RM, Higginson RL & Palmiere EJ (2001) The effect of carbonitride precipitation on the recrystallisation kinetics of microalloyed steel during thermomechanical processing. RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2 (pp 785-790)
  • Palmiere EJ, Han SY & Higginson RL (2000) Effect of Hot Band Grain Size on Recrystallisation and Texture in an Austenitic Stainless Steel. Conference of Metallurgists (pp 727-736). Toronto, 22 August 2000 - 24 August 2000.
  • Palmiere EJ, Yu W & Banks SP (2000) Cellular Automata Modelling of Austenite Grain Coarsening During Reheating. Thermomechanical Processing of Steels (pp 186-193). London, 24 May 2000 - 26 May 2000.
  • Palmiere EJ, Poths RM & Higginson RL (2000) Seeds, Sandwiches and Stones: Complex Precipitation in Microalloyed Steels. Thermomechanical Processing of Steels (pp 113-119). London, 24 May 2000 - 26 May 2000.
  • Palmiere EJ, Black MP & Rainforth WM (2000) Precipitation Behaviour of Nb(CN) in a Model Austenite During Thermomechanical Processing. Thermomechanical Processing of Steels (pp 177-185). London, 24 May 2000 - 26 May 2000.
  • Rainforth WM, Black MP, Poths RM, Higginson RL, Whiteman JA, Palmiere EJ & Sellars CM (1999) Determination of the distribution of NbC precipitates in novel microalloyed steels. ELECTRON MICROSCOPY AND ANALYSIS 1999(161) (pp 467-470)
  • Palmiere EJ, Garcia CI & DeArdo AJ (1998) Influence of processing conditions and alloy chemistry on the static recrystallisation of microalloyed austenite. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MICROALLOYING IN STEELS, Vol. 284-2 (pp 151-157)
  • Xu HQ & Palmiere EJ (1996) Particulate fracture during the thermomechanical processing of a SiCp/Al metal matrix composite. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 1091-1096)
  • Palmiere EJ (1995) Precipitation Phenomena in Microalloyed Steels. Microalloying 95 (pp 307-320). Warrendale, PA, 11 June 1995 - 14 June 1995.
  • Palmiere EJ & Garcia CI (1993) Fundamental Aspects of the Physical Metallurgy of Thermomechanical Processing of HSLA Steels. Fortieth Sagamore Army Materials Research Conference on Metallic Materials for Lightweight Applications (pp 479-498). New York, December 1993.
  • PALMIERE EJ & CANTOR B (1993) MATRIX AND PARTICULATE FRACTURE DURING THE DEFORMATION OF A METAL-MATRIX COMPOSITE. ADVANCED COMPOSITES '93 (pp 1251-1257)
  • PALMIERE EJ, GARCIA CI & DEARDO AJ (1993) SUPPRESSION OF STATIC RECRYSTALLIZATION IN MICROALLOYED STEELS BY STRAIN-INDUCED PRECIPITATION. INTERNATIONAL SYMPOSIUM ON LOW-CARBON STEELS FOR THE 90S (pp 121-130)
  • PALMIERE EJ, GARCIA CI & DEARDO AJ (1992) STATIC RECRYSTALLIZATION AND PRECIPITATION DURING THE HOT DEFORMATION OF AUSTENITE. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PROCESSING, MICROSTRUCTURE AND PROPERTIES OF MICROALLOYED AND OTHER MODERN HIGH STRENGTH LOW ALLOY STEELS (pp 113-133)
  • Palmiere EJ & Garcia CI (1990) Factors Controlling the Recrystallization-Stop Temperature in Hot Deformed Microalloyed Steels. 29th Conference of Metallurgists (pp 137-150). Hamilton, September 1990.
  • Palmiere EJ & Garcia CI (1989) Optimizing Strength and Toughness in Low Carbon Microalloyed Bar Products. Process Technology Conference Proceedings (pp 59-64). Warrendale, PA, 23 October 1988 - 26 October 1988.
  • Palmiere EJ, Burke MG & DeArdo AJ (1988) Precipitation in ULCB Steel During Ion-Nitriding: An APFIM/TEM Investigation. Phase Transformations 87. London, July 1987 - July 1987.
  • Palmiere EJ, Leber HJ & Garcia CI (1987) On The Strength Properties of Niobium-Bearing Low-Carbon Bainitic Forging Steels. Processing, Microstructure and Properties of HSLA Steels (pp 425-438). Warrendale, PA, 3 November 1987 - 5 November 1987.
  • Palmiere EJ, Burke MG & DeArdo AJ (1987) Precipitation During the Ion Nitriding of a Low Carbon Microalloyed Forging Steel. Processing, Microstructure and Properties of HSLA Steels (pp 439-456). Warrendale, PA, 3 November 1987 - 5 November 1987.
  • Palmiere EJ, Rakowski JM, Garcia CI, Meier GH & Pettit FS (1987) The Oxidation and Embrittlement of Ti-Al-Nb Alloys. High Temperature and Materials Science (pp 167-179). Materials Park, OH, October 1997.
  • Palmiere EJ & DeArdo AJ (1987) An Alternative Approach to the Alloy Design and Thermomechanical Processing of Low-Carbon Microalloyed Bar Products. Mechanical Working and Steel Processing Proceedings (pp 79-91). Warrendale, PA, 22 October 1987 - 25 October 1987.
  • Burke MG, Palmiere EJ & DeArdo AJ (1987) . Proceedings, annual meeting, Electron Microscopy Society of America, Vol. 45 (pp 224-225)
  • Muszka K, Lisiecka-Graca P, Simm T & Palmiere EJ () . Key Engineering Materials, Vol. 622-623 (pp 1023-1030)
  • Omar MZ, Atkinson HV, Palmiere EJ, Howe AA & Kapranos P () (pp 677-680)
Research group

PDRA

  • Dr John Nutter (joint with Prof Mark Rainforth)
  • Dr Ashley Scarlett (joint with Dr Richard Thackray)
  • Dr Jiawei Xi (joint with Prof Mark Rainforth)


PhD

  • *Tongyu Wang
  • *Ashley Scarlett (joint with Prof Dan Cogswell)
  • *Sulayman Khan (joint with Prof Martin Jackson)
  • *Ahmad Alsalman (joint with Prof Mark Rainforth)
  • Chenghao Yang (joint with Prof Mark Rainforth)
  • Shengqi Xu (joint with Prof Mark Rainforth)
  • Thomas Cole (joint with Dr Lewis Owen)
  • Lucas Cook (joint with Prof Martin Jackson)
  • *Leon Butterworth (joint with Prof Mark Rainforth)

*Primary supervisor


Technical

  • Mr Dean Haylock (Thermomechanical Processing Laboratory)
Teaching activities

MAT4443 - Metallurgical Processing
MAT630 - Engineering Alloys
MAT6664 - Science of Materials

Professional activities and memberships
  • Fellow, Institute of Materials, Minerals and Mining (IOM3) (FIMMM)
  • Chartered Engineer (CEng)
  • Member, Board of Review for the journal Metals
  • Member, Board of Review for the journal High Temperature Materials
  • Member, International Advisory Board, Intl. Conf. Series Recrystallisation and Grain Growth
  • Member, Scientific Advisory Committee, Intl. Conf. Series Thermomechanical Processing of Steels